How to Set Alarm Thresholds in Remote Monitoring Systems

  • Blog
  • How to Set Alarm Thresholds in Remote Monitoring Systems
How to Set Alarm Thresholds in Remote Monitoring Systems
Share

How to Set Alarm Thresholds in Remote Monitoring Systems

Table of Contents

  • The Role of Alarms in Remote Monitoring
  • What an Alarm Threshold Means
  • Choosing the Values to Measure
  • Defining the Normal Operating Range
  • Separating Warning and Critical Levels
  • Delay and Filtering Settings
  • The Problem of False Alarms
  • Alarm Management and Responsibility
  • Periodic Review of Thresholds
  • Conclusion

Remote monitoring systems increase a plant's visibility from afar and allow problems to be noticed without a site visit. That advantage depends on alarm thresholds being set correctly. If the thresholds are too low, false alarms arrive constantly. If they are too high, real problems are missed.

The Role of Alarms in Remote Monitoring

An alarm is the mechanism that tells the operator a measured value has crossed a defined limit or that a condition has occurred. In a remote monitoring setting, the alarm decides which issue the field team should prioritise.

The alarm should therefore be designed as a decision-support tool, not merely as a notification.

What an Alarm Threshold Means

An alarm threshold is the boundary between normal operation and an abnormal condition. It should be set by considering the manufacturer's design range, the process requirement and a safety margin. A threshold is not a value to be set once and forgotten.

When and why the threshold will trigger should be clearly written in the system documentation.

Choosing the Values to Measure

Not every measurement needs to generate an alarm. The values chosen for alarms should be those meaningful for failure or safety, such as temperature, pressure, vibration, level and flow. Too many unnecessary alarms hide the important ones.

The condition under which a value is meaningful should also be stated. For example, a temperature value should raise an alarm only during operation.

How to Set Alarm Thresholds in Remote Monitoring Systems

Defining the Normal Operating Range

The normal operating range should be defined before thresholds are set. This range should be considered separately for different production conditions and seasonal changes. A single range that treats different conditions as the same leads to false alarms.

The normal range should be assessed together with historical data and manufacturer information. Where data is missing, starting values should be kept conservative and adjusted over time.

Separating Warning and Critical Levels

Using two levels instead of one threshold is a common approach. A warning level indicates a condition that needs attention and allows planned action. A critical level signals a condition that needs immediate response or shutdown.

Linking the two levels to different notification channels and different responsible people improves how effective the alarm is.

Delay and Filtering Settings

Short fluctuations can trigger an alarm the moment a value crosses the threshold. In such cases, a condition can be added that the threshold must be exceeded for a set period. This delay reduces noise without significantly delaying a real problem.

The delay time should match how fast the problem develops. A delay that is too long can miss a problem that develops quickly.

The Problem of False Alarms

Frequent false alarms lead operators to become used to them and to ignore them. This creates the risk that a real alarm is also neglected. The false alarm rate should be monitored regularly, and if it is high, the thresholds should be reviewed.

Alarm fatigue is one of the most common failures of monitoring systems.

Alarm Management and Responsibility

Each alarm should have a responsible person, a response time and a closing record. What to do when an alarm arrives should be defined in the procedure. An alarm with unclear responsibility often goes unanswered.

The alarm history is a valuable source for problem analysis and threshold tuning. The cause of each alarm that is closed should be recorded.

Periodic Review of Thresholds

As production conditions, equipment and process change, thresholds may also need to change. Thresholds should be reviewed at set intervals and compared with the alarm history and outcomes. Changes should be approved in writing.

The record should show who made each threshold change and why.

Conclusion

Alarm thresholds in remote monitoring systems are set through selecting meaningful measurements, defining the normal range, separating warning and critical levels, applying suitable delays and reviewing regularly. Correct thresholds make real problems visible in time and reduce noise.

SS Proje supports the installation of plant monitoring and control systems. Threshold values should be set for each application using manufacturer data, process requirements and the judgement of a qualified engineer.